How to install 1.If the 4pin trail light plug available on your vehicle, plug the connector in the vehicle stander flat 4 pin trail light plug. 2.If your vehicle has a round 4 pin light connector, a widely adapter can be purchased to convert it to a flat 4 pin connector. Or you can clip off the lights bar 4 pin trailer light connector and hard wire the leads directly to the round connector. Black wire from lights bar 4 pin trailer light plug hook up white wire (Negative), brown to brown (tail light); yellow to yellow(left turn signal), green to green (right turn signal)Specifications LED Count for brake lights: 1200 LEDs on 60-inch. Dimensions for tailgate light bar: 60-inch (60" x 1" x 0.5") Wattage: 3w. Voltage for reversing light: 12v. Amperage for turn signal light: 0.25 amp. Brake Light Strip Turn Signal Style: “Sequential”. Rated Lifetime for brake light strip: 50,000 Hours. Waterproof Rating for truck tail light: IP67. Material for tailgate light bar: Rust-Resistant Aluminum. LED Type: Advanced Bright LED. Feature Set: Running | Brake | "1-2-3" Sequential Turn Signals | Reverse | Sequential Hazards. Mounting: 3M Adhesive with reinforced applicator. Working Temp: -20°F to 170°F. Plug’n’Play: 4-Pin Trailer Adapter with Backup wiring. Not Compatible with: Ford's Blind Spot Information System (BLIS) with Trailer Coverage and Cross Traffic Alert.  Warranty: 2 Years.
G**C
Nice lighting for 2015 Chevy Silverado LT 4x4
This is a replacement for another brand that claimed to be waterproof but wasn't (never been immersed in water either) and had failing leds at the wired end after just over a year. I had previously soldered a 'piggyback' trailer connector harness into the existing connector on the bumper so the wiring was plug n play. First, remove the tailgate after disconnecting the reverse camera at the junction block on left side of the spare tire (pull red tab towards cab then squeeze connector) and feed the wire through the bed. The tailgate comes off from passenger side first, then with it almost vertical, pull away from driver's side hinge. You may or may not want an extra set of hands for this. Somewhat unwieldy, but not too bad. Next, I measured the led section of light. It was 58 1/8", so I split the difference and centered that by the hole for the reverse camera wire in bed. I also cut 1" of the tape off the ends so the bar was securely taped on the bed (as pictured).Overall, I am happy with the way it looks, the reverse is really bright and is helpful at night.Time will tell how durable this set is, the three year warranty was one of the reasons I chose this set.
A**R
Junk won't last
Died after 2 months!!
A**R
Glitches like crazy!
Terrible product. Glitches like crazy when the vehicle runs
C**R
OK are nice n bright stick on is good
04 Ram 2500
D**N
Was super easy to install
Looks and works great!! If you mount it to low you can see individual LEDs but mount it higher just behind the lip on the bottom of the tailgate and you get a nice seamless look from the ambient glow.
E**O
GOOD
I GOT THESE FOR MY DAD, HE LOVES THEM AND THEY ARE SUPER BRIGHT, HES HAD THEM SINCE X-MAS, NO ISSUES, NO BURNED OUT LEDS.
Trustpilot
1 week ago
1 month ago
